Coda File System

Re: createvol_rep failed on coda-6.9.0 and linux

From: Reiner Dassing <dassing_at_fs.wettzell.de>
Date: Fri, 26 Jan 2007 10:36:09 +0100
Hello Jan,

thanks for your response.

Well, I made sure that
'vicepb' partition is setup (using /usr/local/sbin/vice-setup-srvdir)

I restartet the server and now I found in
/vice/srv/SrvLog thet the codaserver is not running:

Date: Fri 01/26/2007

09:36:39 Coda Vice, version 6.9.0       log started at Fri Jan 26 
09:36:39 2007

09:36:39 RvmType is Rvm
09:36:39 Main process doing a LWP_Init()
09:36:39 Main thread just did a RVM_SET_THREAD_DATA

09:36:39 Setting Rvm Truncate threshhold to 5.

log_recover failed.
do_rvm_options failed
09:36:39 rvm_init failed RVM_EIO

What does this mean?
well codaserver was running after first setup, i.e. where only partition 
'vicepa'
was defined.

Best regards, Reiner

  Harkes wrote:

> On Thu, Jan 25, 2007 at 05:51:04PM +0100, Reiner Dassing wrote:
> 
>>a new setup of coda-6.9.0 on Debian Linux did allow to createvol_rep
>>the default /vicepa but the command
>>
>>"createvol_rep iersdc tarzan1/vicepb tarzan2/vicepb"
>>shows: "Failed to dump the current VRDB into /vice/db/VRList.new"
> 
> 
> Did you set up /vice/db/vicetab to have a valid entry for /vicepb?
> Also, you may have to restart the servers before the new partition is
> picked up from that file.
> 
> 
>>+ volutil -h tarzan1 dumpvrdb /vice/db/VRList.new
>>+ '[' 255 -ne 0 ']'
>>+ echo 'Failed to dump the current VRDB into /vice/db/VRList.new'
>>Failed to dump the current VRDB into /vice/db/VRList.new
>>+ exit 1
> 
> 
> If you run that volutil command from the prompt does it give an
> explanation for the error? In the script we redirected stderr to
> /dev/null to avoid too much clutter.
> 
> 
>># more /vice/vol/BigVolumeList
>>P/vicepa Htarzan1 T8b3f8c F8b3f78
>>W/.0 I1000001 H1 P/vicepa m0 M0 U2 W1000001 C45b88f7a D45b88f7a B0 A0
> 
> 
> This does look like we don't know about any vicepb 'partitions' on
> either tarzan1 or tarzan2, as there would be a P/vicepb line in the
> volume list. But maybe the script never got far enough to update this
> information.
> 
> Jan
> 
> 
> 
Received on 2007-01-26 04:40:13